Wintest - Issue 5.a
GUF514.7
AUTOTRONIC 5 - Power Shuttle - Calibration and adjustments
MA-11-01283A
Preocedure to follow
Fig. 2
1) Preliminary operations
Start the engine.
Move Power Shuttle lever to
neutral position
Release the clutch pedal
2) Entering adjustment
mode
Press simultaneously and for
4 s the Hare / Tortoise range
switch and differential lock
switch
The forward and reverse
indicator lights flash quickly
and simultaneously
After 4 s
3) Choosing the clutch
Select the clutch requiring
parameter adjustment by
moving the Power Shuttle lever
to forward or reverse position,
then move the lever to neutral
position.
The indicator light indicates
the direction selected
As long as the clutch is not
selected, the Auto 5 stays in
selection standby mode (3).
Once selected, 4 s are
allowed between each
operation
4) Adjusting responsive-
ness
Move the lever forwards to
increase responsiveness or
backwards to reduce
responsiveness, then quickly
return the lever to neutral.
The indicator light of the
selected clutch changes
status each time the lever
is moved
This adjustment procedure
can be repeated 5 times in
the same direction for the
same clutch.
In this case return to step
(1).
5) To
Validate:
Wait 4 s without carrying out
any operation
Cancel:
press the clutch pedal down
within 4 s
The Power Shuttle locks
If the operator moves the
lever before 4 seconds has
passed, the Auto 5 returns
to step (1).
To Next Page
Loading...
