FRONT SUSPENSION
02-13–2
FRONT SHOCK ABSORBER CONSTRUCTION
id021300100500
• Excellent response shock absorbers with large-
diameter pistons and built-in rebound springs
which suppress inner wheel lifting during
cornering have been adopted for improved riding
comfort and handling stability.
• Separated input type front shock absorber
mounts have been adopted. Due to this, the
shock absorbers function efficiently, improving
steering stability and riding comfort.
• To reduce shock absorber inner friction that
occurs when lateral force acts on the shock
absorbers, the coil springs have been optimally
positioned.
• In addition, the adoption of ball bearings in the
mount bearings has improved handling and ride
comfort.
End Of Sie
NG: FRONT CROSSMEMBER
FRONT CROSSMEMBER CONSTRUCTION
id021300100600
• A six-point rubber mount system has been
adopted for the front crossmember. Due to this,
the application of preload in the vertical direction
has improved rigidity providing enhanced
handling stability, and the utilization of horizontal
flexibility has improved riding comfort.
End Of Sie
BALL TYPE
STRUT
BEARING
acxuun00000386
RUBBER MOUNT
ac9uun00000156
3423-1U-06H(02-13).fm 2 ページ ２００６年１１月２１日 火曜日 午後５時７分
To Next Page
Loading...
