Mazda CX-9 2007 - Airflow Mode Manual Control; Air Intake Control Outline; Air Intake Control System Diagram

CONTROL SYSTEM
07-40–27
07-40
MAX HOT and MAX COLD correction
Front
• When the set temperature is at 32.0 or 15.0, the airflow mode is set as shown in the table.
Rear
• The airflow mode is fixed in heat with the set temperature of 32.0 (MAX HOT), and in vent with 15.0 (MAX
COLD).
Airflow Mode Manual Control
• The airflow modes can be switched by operating the airflow mode selector switch and the front defroster switch.
End Of Sie
NG: AIR INTAKE CONTROL
AIR INTAKE CONTROL OUTLINE
id074000103300
Features
• Consists of the air intake automatic and manual controls with the front climate control unit controlling the air
intake mode via the air intake actuator.
End Of Sie
AIR INTAKE CONTROL SYSTEM DIAGRAM
id074000103400
End Of Sie
TEMPERATURE CONTROL DIAL
AIRFLOW
MODE
DRIVER SIDE PASSENGER SIDE
15.0 15.0 VENT
15.0 EXCEPT 15.0, 32.0 VENT
EXCEPT 15.0, 32.0 15.0 VENT
15.0 32.0 BI-LEVEL
32.0 15.0 BI-LEVEL
32.0 EXCEPT 15.0, 32.0 HEAT
EXCEPT 15.0, 32.0 32.0 HEAT
32.0 32.0 HEAT
FRONT
VENT, BI-LEVEL, HEAT, HEAT/DEF,
DEFROSTER
OUTPUT
AIR INTAKE
ACTUATOR
OPERATION
AIR INTAKE
DOOR
AIR INTAKE
MODE
CHANGE
TARGET
TEMPERATURE
FRONT
CLIMATE
CONTROL
UNIT
ac9uun00000235
3423-1U-06H(07-40).fm 27 ページ ２００６年１１月２２日 水曜日 午後２時４８分