ON-BOARD DIAGNOSTIC [AW6A-EL, AW6AX-EL]
05-02–13
05-02
DLC-2 OUTLINE [AW6A-EL, AW6AX-EL]
id050211100900
• A connector (DLC-2) conforming to International Organization for Standardization (ISO) standards has been
added.
• Shape and terminal arrangement as stipulated by the ISO 15031-3 (SAE J1962) international standard has
been adopted for this connector. The connector has a 16-pin construction that includes the B+, CAN_H (HS),
CAN_L (HS), CAN_H (MS), CAN_L (MS), GND1 and GND2 terminals.
End Of Sie
Terminal Function
B+ Battery power supply terminal
CAN_L (HS) Serial communication Lo terminal (HS)
CAN_H (HS) Serial communication Hi terminal (HS)
CAN_L (MS) Serial communication Lo terminal (MS)
CAN_H (MS) Serial communication Hi terminal (MS)
GND1 Body ground terminal
GND2 Serial communication ground terminal
CAN_L
(HS)
CAN_H
(HS)
CAN_L
(MS)
CAN_H
(MS)
GND2
GND1
B+
DLC-2
acxuun00000684
3423-1U-06H(05-02).fm 13 ページ ２００６年１１月２１日 火曜日 午後５時１６分
To Next Page
Loading...
