EMISSION SYSTEM [MZI-3.5]
01-16–7
01-16
POSITIVE CRANKCASE VENTILATION (PCV) SYSTEM STRUCTURE [MZI-3.5]
id0116d1101200
• Consists of a PCV valve, ventilation hose and PCV valve heater fitting.
End Of Sie
POSITIVE CRANKCASE VENTILATION (PCV) SYSTEM OPERATION [MZI-3.5]
id0116d1101300
• Blowby gas (unburnt gas), including CO and HC exhausted from the crankcase, is forced into the intake air
system and burned in the combustion chamber to prevent its atmospheric release.
End Of Sie
NG: PCV VALVE
POSITIVE CRANKCASE VENTILATION (PCV) VALVE FUNCTION [MZI-3.5]
id0116d1101700
• Adjusts the amount of blowby gas conducted to the intake air system according to the intake manifold vacuum.
• Regulates the air (including blowby gas) passing from the cylinder head cover to the dynamic chamber during
low load (when vacuum in the intake manifold is high) to ensure an optimum air/fuel ratio.
• Heater operates by the signal from PCM when IAT is low, and anti-icing is done.
End Of Sie
POSITIVE CRANKCASE VENTILATION (PCV) VALVE CONSTRUCTION/OPERATION [MZI-3.5]
id0116d1101800
• The PCV valve is installed on the cylinder head.
• Consists of a O-ring, spring and valves.
• The PCV valve ensures the passage of blowby
gas by opening the valve according to the intake
manifold vacuum, and adjusts the amount of gas
by spring force.
End Of Sie
POSITIVE CRANKCASE VENTILATION (PCV) VALVE HEATER FITTING FUNCTION [MZI-3.5]
id0116d1105900
• Heater operates by the signal from PCM when IAT is low, and anti-icing is done.
End Of Sie
: TO PCM
PCV VALVE
VENTILATION HOSE
PCV VALVE
HEATER FITTING
ac9uun00000007
PCV VALVE
O-RING
TA B
TO DYNAMIC CHAMBER
FROM CYLINDER HEAD
PCV VALVE
HEATER CONTROL
ac9uun00000025
3423-1U-06H(01-16).fm 7 ページ ２００６年１１月２２日 水曜日 午後２時４分
To Next Page
Loading...
