MECHANICAL [MZI-3.5]
01-10–3
01-10
CYLINDER BLOCK CONSTRUCTION [MZI-3.5]
id0110c1100500
• Aluminum alloy has been adopted on the cylinder block, which consists of a cylinder block and a main bearing
cap support.
• The cylinders are numbered 1, 2, 3 from the front along the right bank and 4, 5, 6 from the front along the left
bank.
• The liner is cast into each cylinder.
• The main bearing cap support has been adopted to increase the rigidity.
End Of Sie
NG: CRANKSHAFT
1
2
3
4
5
6
CYLINDER BLOCK
CYLINDER LINER
MAIN BEARING
CAP SUPPORT
ENGINE FRONT
ac9uun00000056
3423-1U-06H(01-10).fm 3 ページ ２００６年１１月２２日 水曜日 午前９時２３分
To Next Page
Loading...
