DYNAMIC STABILITY CONTROL/ROLL STABILITY CONTROL
04-18–30
DSC INDICATOR LIGHT FUNCTION
id041800820100
• The DSC indicator light, built into the instrument cluster, informs the driver of the following vehicle conditions.
— Roll stability control (RSC) is operating
— Dynamic stability control (DSC) is operating (vehicle side-slip)
— Traction control system (TCS) is operating (drive wheel slipping)
End Of Sie
DSC INDICATOR LIGHT OPERATION
id041800820200
• When the dynamic stability control (DSC)/roll stability control (RSC) and controller area network (CAN) lines
are normal, the DSC indicator light illuminates for approx. 3 s when the ignition switch is turned to the ON
position to check the light function. When the system is malfunctioning, the DSC indicator light remains
illuminated.
• When the RSC or DSC or traction control system (TCS) is operating (RSC/DSC/TCS has not been disabled by
pressing the TCS OFF switch), the DSC indicator light operates as follows:
DSC Indicator Light Operation
End Of Sie
NG: TCS OFF SWITCH
Item DSC indicator light condition
TCS, DSC, RSC not operating Not illuminated
TCS operating
Flashes (0.5 s intervals)DSC operating
RSC operating
BRAKE
DSC INDICATOR LIGHT
ac9uun00000403
3423-1U-06H(04-18).fm 30 ページ ２００６年１１月２２日 水曜日 午後２時３８分
To Next Page
Loading...
