Mazda CX-9 2007 - Engine Structural View; Cylinder Head Construction [Mzi-3.5]; Cylinder Head Cover Construction [Mzi-3.5]; Mechanical [Mzi-3.5]

MECHANICAL [MZI-3.5]
01-10–2
CYLINDER HEAD COVER CONSTRUCTION [MZI-3.5]
id0110c1100200
• The cylinder head cover is made of integrated aluminum alloy, which is lightweight.
• There are holes for installing the oil control valve (OCV).
• The cylinder head cover has been equipped with a dipstick insertion hole.
End Of Sie
CYLINDER HEAD CONSTRUCTION [MZI-3.5]
id0110c1100300
• A high-heat conductive, lightweight aluminum alloy cylinder head has been adopted.
• Compact, pentroof-type combustion chambers have been adopted.
• Torque-to-yield cylinder head bolts have been adopted for the cylinder head bolts.
• The boss for installing the camshaft position (CMP) sensor is provided at the rear of the cylinder head.
End Of Sie
NG: CYLINDER BLOCK
LH RH
DIPSTICK
INSERTION
HOLE
OCV ATTACHMENT HOLE
ac9uun00000027
CYLINDER HEAD BOLT
ENGINE FRONT SIDE
EXHAUST SIDE
INTAKE SIDE
EXHAUST SIDE
INTAKE SIDE
ac9uun00000028
3423-1U-06H(01-10).fm 2 ページ ２００６年１１月２２日 水曜日 午前９時２３分