ON-BOARD DIAGNOSTIC [AW6A-EL, AW6AX-EL]
05-02–1
05-02
05-02 ON-BOARD DIAGNOSTIC [AW6A-EL, AW6AX-EL]
ON-BOARD DIAGNOSTIC (OBD)
SYSTEM OUTLINE
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . 05-02–1
ON-BOARD DIAGNOSTIC (OBD)
SYSTEM BLOCK DIAGRAM
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . 05-02–2
MALFUNCTION DETECTION
FUNCTION
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . 05-02–3
Malfunction Detection Function . . . . . . 05-02–3
DTC Table . . . . . . . . . . . . . . . . . . . . . . 05-02–3
MEMORY FUNCTION
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . 05-02–4
MALFUNCTION INDICATION
FUNCTION
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . 05-02–4
FAIL-SAFE FUNCTION
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . . 05-02–5
Emergency Mode 1 . . . . . . . . . . . . . . . . 05-02–11
Emergency Mode 2 . . . . . . . . . . . . . . . . 05-02–11
PARAMETER IDENTIFICATION (PID)
DATA MONITORING FUNCTION
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . . 05-02–12
Monitor Item Table. . . . . . . . . . . . . . . . . 05-02–12
SIMULATION FUNCTION
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . . 05-02–12
Simulation Item Table . . . . . . . . . . . . . . 05-02–12
DLC-2 OUTLINE
[AW6A-EL, AW6AX-EL] . . . . . . . . . . . . . 05-02–13
End of Toc
NG: AUTOMATIC TRANSAXLE
ON-BOARD DIAGNOSTIC (OBD) SYSTEM OUTLINE [AW6A-EL, AW6AX-EL]
id050211100100
• The OBD system has the following functions:
— Malfunction detection function: detects malfunctions of the input/output devices and system components of
the ATX.
— Fail-safe function: controls the output device function and input value of the sensors/switches to ensure
minimum vehicle drivability when a failure is detected.
— Memory function: stores the DTC when a failure is detected.
— PID data monitoring function: monitors the input/output signal and calculated value of the TCM and sends
the monitoring data to the scan tool.
— Simulation function: Allows override operation of simulation items for input/output system parts preset in the
TCM.
End Of Sie
3423-1U-06H(05-02).fm 1 ページ 2006年11月22日 水曜日 午後5時30分