MECHANICAL [MZI-3.5]
01-10–4
CRANKSHAFT, MAIN BEARING CONSTRUCTION [MZI-3.5]
id0110c1100800
• Consists of two upper thrust bearings and a lower thrust bearing.
• The crankshaft has internal oil passages for supplying oil to each journal.
• The internal surface of the upper main bearing has oil grooves and holes for oil lubrication.
End Of Sie
NG: CRANKSHAFT PULLEY
CRANKSHAFT PULLEY CONSTRUCTION [MZI-3.5]
id0110c1101800
• A torsional damper pulley is used for the crankshaft pulley to reduce noise and torsional vibration.
End Of Sie
NG: PISTON
SUPPLIES ENGINE OIL
UPPER THRUST BEARING
UPPER MAIN BEARING
LOWER MAIN BEARING
LOWER THRUST BEARING
CRANK SHAFT
ac9uun00000033
CRANKSHAFT PULLEY
ac9uun00000034
3423-1U-06H(01-10).fm 4 ページ ２００６年１１月２２日 水曜日 午前９時２３分
To Next Page
Loading...
