ON-BOARD DIAGNOSTIC
04-02–11
04-02
DLC-2 CONSTRUCTION
id040200111100
• A connector (DLC-2) conforming to International Organization for Standardization (ISO) standards has been
added.
• Shape and terminal arrangement as stipulated by the ISO 15031-3 (SAE J1962) international standard has
been adopted for this connector. The connector has a 16-pin construction that includes the HS_CAN_H,
HS_CAN_L, MS_CAN_H, MS_CAN_L, GND1, GND2 and B+ terminals.
End Of Sie
Terminal Function
HS_CAN_L Serial communication Lo terminal (HS)
HS_CAN_H Serial communication Hi terminal (HS)
MS_CAN_L Serial communication Lo terminal (MS)
MS_CAN_H Serial communication Hi terminal (MS)
GND1 Body ground terminal
GND2 Serial communication ground terminal
B+ Battery power supply terminal
DLC-2
B+
MS_
CAN_L
HS_
CAN_H
GND2 GND1
MS_
CAN_L
MS_
CAN_H
ac9uun00000257
3423-1U-06H(04-02).fm 11 ページ ２００６年１１月２１日 火曜日 午後５時１２分
To Next Page
Loading...
