Mazda CX-9 2007 - Catalytic Converter System; Catalytic Converter System Operation [Mzi-3.5]; Catalytic Converter System Structure [Mzi-3.5]; Evaporative Emission (Evap) Control System Outline [Mzi-3.5]

EMISSION SYSTEM [MZI-3.5]
01-16–5
01-16
CATALYTIC CONVERTER SYSTEM STRUCTURE [MZI-3.5]
id0116d1101500
• Consists of a three way catalytic converter and insulator.
• A catalytic converter utilizing a platinum—palladium—rhodium system has been adopted.
System diagram
End Of Sie
CATALYTIC CONVERTER SYSTEM OPERATION [MZI-3.5]
id0116d1101600
• Contaminants in the exhaust gas (HC, CO, NO
X
) are purified by oxidization and deoxidization while passing
through the catalytic converter.
— Oxidization process
• Noxious HC (hydrocarbon) and CO (carbon monoxide) are bonded to oxygen which is converted to
non-noxious carbon dioxide and water.
O
2
+ HC + CO → CO
2
+ H
2
O
— Deoxidization process
• Noxious NO
X
(nitrogen oxide) is converted to non-noxious nitrogen and oxygen. A part of the oxygen
generated at this time is used in the oxidization process.
NO
X
→ N
2
+ O
2
End Of Sie
NG: EVAP CONTROL SYSTEM
EVAPORATIVE EMISSION (EVAP) CONTROL SYSTEM OUTLINE [MZI-3.5]
id0116d1100800
Features
• With the adoption of the charcoal canister, release of evaporative gas into the atmosphere has been prevented.
• A duty solenoid valve (purge control valve) has been adopted for optimum control according to engine
operation conditions.
End Of Sie
: TO PCM
WU-TWC (RH)
WU-TWC (LH)
ac9uun00000008
3423-1U-06H(01-16).fm 5 ページ ２００６年１１月２２日 水曜日 午後２時４分