INTAKE-AIR SYSTEM [MZI-3.5]
01-13–4
AIR CLEANER CONSTRUCTION [MZI-3.5]
id0113c1101400
Structure
• The air cleaner is composed of an air cleaner
cover, air cleaner case, air cleaner element.
• A dry type air cleaner element has been adopted.
End Of Sie
NG: INTAKE MANIFOLD
INTAKE MANIFOLD CONSTRUCTION [MZI-3.5]
id0113c1100800
• An intake manifold separated from the dynamic
chamber has been adopted.
End Of Sie
NG: THROTTLE BODY
THROTTLE BODY FUNCTION [MZI-3.5]
id0113c1101500
• An electronic throttle valve has been adopted which opens and closes the throttle valve with the actuator
according to a signal from the PCM. It enables precise intake air control at all engine speed ranges.
End Of Sie
THROTTLE BODY CONSTRUCTION [MZI-3.5]
id0113c1147700
• The throttle body mainly consists of the throttle valve, TP sensor, and throttle actuator.
• A low-energy consuming DC motor has been adopted for the throttle actuator to improve response
performance.
• To prevent the possible loss of PCM data and throttle body settings, the throttle body cannot be disassembled.
End Of Sie
AIR CLEANER COVER
AIR CLEANER CASE
AIR CLEANER ELEMENT
ac9uun00000019
DYNAMIC CHAMBER
INTAKE MANIFOLD
ac9uun00000020
3423-1U-06H(01-13).fm 4 ページ ２００６年１１月２１日 火曜日 午後４時５５分
To Next Page
Loading...
