Mazda CX-9 2007 - On-Board Diagnostic System Malfunction Display Function[Mzi-3.5]; Features; Function; On-Board Diagnostic System Diagnostic Data Memory Function[Mzi-3.5]

ON-BOARD DIAGNOSTIC [MZI-3.5]
01-02–17
01-02
End Of Sie
ON-BOARD DIAGNOSTIC SYSTEM MALFUNCTION DISPLAY FUNCTION[MZI-3.5]
id0102d1142000
Features
• The MIL has been adopted to alert the driver when a malfunction occurs in the engine control system.
• The MIL is built into the instrument cluster.
Function
• When an engine control system malfunction occurs, a DTC is stored in the PCM at the same time the MIL
illuminates.
End Of Sie
ON-BOARD DIAGNOSTIC SYSTEM DIAGNOSTIC DATA MEMORY FUNCTION[MZI-3.5]
id0102d1141700
Features
• A diagnostic data memory function has been adopted for storing/clearing engine control system diagnostic
data.
Memory Function
• The following diagnostic data can be stored in the PCM using the memory function:
— DTC count
— DTCs
— Freeze frame data
— On-board diagnostic system status
• A DTC is stored in the PCM when an engine control system malfunction occurs. This stored DTC can then be
read-out using the Mazda Modular Diagnostic System (M-MDS) and is displayed as a five character code
(PXXXX).
• The DTC is stored in or cleared from the PCM according to the drive cycle count setting.
Initialization Function
• Diagnostic data stored in the PCM can be cleared using the initialization function.
End Of Sie
BRAKE
MIL
ac9uun00000597
3423-1U-06H(01-02).fm 17 ページ ２００６年１１月２９日 水曜日 午前９時１５分