DOORS AND LIFTGATE
09-11–2
End Of Sie
DOOR CONSTRUCTION
id091100100100
• The internal parts of the door have been integrated into a door module.
• A corrugated side impact bar and cylindrical side impact bar have been adopted to improve rigidity in case of
collision.
• The side impact bars, located on the door, prevents the door from deforming inward by dispersing the impact to
the floor in case of a side-impact collision.
• The shock absorbing pad, located inside the door trim and door, functions to soften collision impact.
End Of Sie
POWER LIFTGATE (PLG) SYSTEM OUTLINE
id091100104600
• An automatic open/close power liftgate system has been adopted.
• The PLG system has the following functions.
— Auto open/close function
— Manual open/close function
— Fail-safe function
— Malfunction detection function
• A buzzer sounds when the PLG is operating and if a malfunction is detected.
• An auto closure mechanism has been adopted on the liftgate latch and lock actuator which performs automatic
closing from the latch release/ajar condition during opening/closing in auto/manual.
End Of Sie
FRONT DOOR
FRONT DOOR
MODULE
REAR DOOR
MODULE
REAR DOOR
ac9uun00000414
A
B
SEC. A—A
SEC. B—B
FRONT DOOR
REAR DOOR
FRONT DOOR TRIM
REAR DOOR TRIM
SIDE IMPACT BAR
SIDE IMPACT BAR
A
B
SHOCK ABSORBING
PAD
SHOCK ABSORBING
PAD
SHOCK ABSORBING
PAD
SHOCK ABSORBING
PAD
ac9uun00000415
3423-1U-06H(09-11).fm 2 ページ ２００６年１１月２１日 火曜日 午後５時３６分
To Next Page
Loading...
