SEATS
09-13–10
Manual call up
• When the following conditions are met, the call up operation is performed only while the memory switch is being
operated.
— Door is closed (door switch off) or the ignition switch is in the ON position.
— Seat position has been programmed.
— Memory switch and set switch are off.
— When the vehicle is stopped (vehicle speed 2 km/h [1.24 mph] or less).
Note
• Auto call up is cancelled when any of the following conditions are met during the manual call up.
— Memory switch operation has stopped.
— Manual operation using the power seat switch has been performed.
— LOCK/UNLOCK operation has been performed using the transmitter with the ignition switch in the
LOCK position.
— While driving (vehicle speed 2 km/h [1.24 mph] or more).
Memory Call Up Function (Transmitter)
• If the door is opened within approx. 40 ±10 s after the doors are unlocked using the transmitter, the call up
operation is performed and the seat moves to the position programmed in the transmitter.
• Seat position is automatically called up when the following conditions are met.
— Seat position has been programmed by transmitter.
— Ignition switch is in the LOCK position.
— Memory switch and set switch are off.
— When the vehicle is stopped (vehicle speed 2 km/h [1.24 mph] or less).
Note
• Auto call up continues when the door is closed (door switch off) or the ignition switch is turned to the ON
position during the auto call up.
• Auto call up is cancelled if any of the following conditions are met during the auto call up.
— Manual operation using the power seat switch has been performed.
— Memory switch or the set switch has been operated.
— LOCK/UNLOCK operation using the transmitter has been performed with the ignition switch in the
LOCK position.
— While driving (vehicle speed 2 km/h [1.24 mph] or more)
End Of Sie
3423-1U-06H(09-13).fm 10 ページ ２００６年１１月２１日 火曜日 午後５時３９分
To Next Page
Loading...
