WIPER/WASHER SYSTEM
09-19–4
WINDSHIELD WIPER SYSTEM OPERATION
id091900100600
Continuous Operation
1. When the windshield wiper switch is turned to 1, current (1) flows, and the windshield wiper motor operates at
low speed.
2. When the windshield wiper switch is turned to 2, current (2) flows, and the windshield wiper motor operates at
high speed.
3. When the windshield wiper switch is turned to the OFF position, the wipers stop in the park position due to the
autostop operation.
Autostop Operation
1. When the windshield wiper switch is turned to the OFF position while the wipers are operating, current flows to
the autostop switch, which is on, and the windshield wiper motor operates until it returns to the park position,
stopping the wipers.
IG2
INT
INT
OFF
OFF
1
1
2
2
(2)
(1)
INT
RELAY
ONE-TOUCH
SWITCH
INT
VOL
WINDSHIELD WIPER
SWITCH
WINDSHIELD
WASHER
SWITCH
WINDSHIELD
WASHER
MOTOR
AUTO-STOP
SWITCH
WINDSHIELD
WIPER MOTOR
acxuun00000407
IG2
INT
INT
OFF
OFF
1
1
2
2
INT
RELAY
ONE-TOUCH
SWITCH
INT
VOL
WINDSHIELD WIPER
SWITCH
WINDSHIELD
WASHER
SWITCH
WINDSHIELD
WASHER
MOTOR
AUTO-STOP
SWITCH
WINDSHIELD
WIPER MOTOR
acxuun00000408
3423-1U-06H(09-19).fm 4 ページ ２００６年１１月２１日 火曜日 午後５時４５分
To Next Page
