Medivators ADVANTAGE PLUS - Page 149

149
Endoscope Replacement
If an endoscope is replaced by a new one, data traceability may be lost. There are two solutions:
1. Consecutively number the endoscope codes. Although the old endoscope is no longer used, the code
and data remain stored in the system.
2. Create a Memo report. The information for the replaced endoscope is noted in the memo eld along
with the replacement date.
New endoscope data are entered via the endoscope registration.
Editing Data
To change any information already entered, do the following:
1. Click on the Edit Icon .
2. Click on the eld to be modied and enter the new information.
3. Select another eld to save the data.
4. Click on the Edit Icon to disable editing.
Deleting Data
To completely remove an endoscope and all the information entered for it, follow these steps:
1. Click on the Edit Icon
to enable editing.
2. Click on the line to be deleted in the overview list.
3. Click on the Delete button.
4. A window opens asking for conrmation. Click OK to delete the information. Click Cancel to go
back without deleting any data.
5. Click on the Edit Icon to disable editing.