148
Adding Parameter Sets
Different types of endoscopes can be linked to a parameter set in the disinfection program. A standard
disinfection program is then provided. These are the most common types of endoscopes:
• Bronchoscope
• Colonoscope
• Cystoscope
• Duodenoscope
• Gastroscope
Reference the Hookup Application Guide for the applicable hookup part number and parameter set.
Additional parameter sets may be required upon acquiring new or additional endoscopes.
To add a new parameter copy the parameter set to the program Files/MDS/Import folder. Open the
Management program using the shortcut in the MEDIVATORS
®
ADVANTAGE PLUS
®
Automated
Endoscope Reprocessor folder on the desktop. Select the conguration tab and select programs. Click on
the Import Icon . Select the parameter set from the Open Dialog Box.
Adding a New Endoscope
Information for a new endoscope is entered as follows:
1. Click on Edit Icon to enable editing.
2. Click on the New button at the top of the Endoscope eld. An empty input line appears.
3. Place the cursor in the Code eld and enter the data.
4. Move the cursor to the next eld. Click on the arrow on the right side to select the appropriate
endoscope type.
5. Continue entering data in all applicable elds.
6. If you wish to add a memo, click on the arrow key to open a small notepad. Type in your memo and
click the OK button to save.
7. Click on the Edit Icon to disable editing.
To Next Page
Loading...
