EasyManua.ls Logo

Medivators ADVANTAGE PLUS - Page 170

Medivators ADVANTAGE PLUS
184 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
170
Both PCs (Client and Server)
1. Take a HUB
2. Connect each PC with a network cable to the HUB
3. Make sure both computers have a unique computer name (for example MDS-Server and MDS-4010)
4. Go to your Control Panel System Computer Name
5. Click on “Change…”, and change name if necessary.
6. Select “Workgroup” and enter “MDS”.
7. Go to your Control Panel Network Connections.
8. Click with your right mouse button on “Local Area Connectionsand select Properties”.
9. Select “Internet Protocol (TCP/IP)” and click on “Properties”.
10. Select “Use the following IP address” and enter an IP address, for example 254.169.0.10
(MDS 4010). If Subnet Mask is blank, enter something like 255.255.255.0, then click “OK”.
11. Do the same for the second PC (or server), for example 254.169.0.1 (MDS-Server). If Subnet Mask
is blank, enter something like 255.255.255.0, then click “OK”.
Client (MEDIVATORS
®
ADVANTAGE PLUS
®
system)
12. Go to “Start” on your taskbar and select “Run…” and then enter “regedit
13. In the Registry Editor open <HKEY_LOCAL_MACHINE> <SOFTWARE> <MDS>
14. Select LIOfolder and double click on ServerAddress”. Change the value data” to the
name of the server (for example MDS-Server)
15. Select Management folder and double click on ServerAddress”. Change the value
data” to the name of the server (for example MDS-Server)
16. Go to the MEDIVATORS
®
ADVANTAGE PLUS
®
Automated Endoscope Reprocessor folder in
Program Files, click on your right mouse button and select “Sharing and Security…”.
17. Select “Share this folder” and click “OK”.
Both PCs (Client and Server)
18. Restart Windows on both PC’s.
19. Open “My Network Places from your desktop and click on Entire Network -->
Microsoft Windows Network”.
20. You should see a MEDIVATORS ADVANTAGE PLUS System folder with two PC’s inside (the
shared MDS-server and MDS-4010 folder).
Server (Database PC)
21. Start the server application on the Server PC.
Client (MEDIVATORS ADVANTAGE PLUS system)
22. Start LIO on the MEDIVATORS ADVANTAGE PLUS System PC.

Table of Contents

Other manuals for Medivators ADVANTAGE PLUS

Related product manuals