EasyManua.ls Logo

Medivators ADVANTAGE PLUS - Page 169

Medivators ADVANTAGE PLUS
184 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
169
8. Select “Use the following IP address” and enter an IP address, for example 254.169.0.1
(MDS-Server). If Subnet Mask is blank, enter something like 255.255.255.0, then click “OK”.
9. Install the Server, Management, Database Server and Setup Database applications from the MDS PC
software setup le. Enter the computer name when asked for the “Server name or server IP-address”.
Client (MEDIVATORS
®
ADVANTAGE PLUS
®
system)
10. Connect PC to HUB
11. Go to Control Panel System Computer Name
12. Click on “Change…”, and change name if necessary.
13. Select “Workgroup” and enter “MDS”. Click “OK”.
14. Go to your Control Panel Network Connections.
15. Click with your right mouse button on “Local Area Connectionsand select Properties”.
16. Select “Internet Protocol (TCP/IP)” and click on “Properties”.
17. Select “Use the following IP address” and enter an IP address, for example 254.169.0.10 (MDS 4010).
If Subnet Mask is blank, enter something like 255.255.255.0, then click “OK”.
18. Install the LIO and Print Service applications from the MDS PC software setup le. Enter the name
of the Server PC (MDS-Server) when asked for the “Server name or server ip-address”.
19. Go to the MEDIVATORS ADVANTAGE PLUS System folder in Program Files, click on your right
mouse button and select “Sharing and Security…”.
20. Select “Share this folder” and click “OK”.
Both PCs (Server and Client)
21. Restart Windows on both PC’s.
22. Open My Network Places from your desktop and click on Entire Network -->
Microsoft Windows Network”. You should see a MDS folder with two PC’s inside (the shared
MDS-Server and MDS-4010 folder).
Server (Database PC)
23. Start the server application on the Server PC.
Client (MEDIVATORS
®
ADVANTAGE PLUS
®
Automated Endoscope Reprocessor)
24. Start LIO on the MEDIVATORS ADVANTAGE PLUS System PC.
If the Medivators ADVANTAGE PLUS System PC software has previously been installed on the
MEDIVATORS ADVANTAGE PLUS System reprocessor units, these instructions should be followed
instead of those described above.

Table of Contents

Other manuals for Medivators ADVANTAGE PLUS

Related product manuals