◆
Do not install the product in the place exposed to direct sunlight, otherwise, property damage may be
caused.
◆
Cable lugs must be firmly connected to the terminals of main circuit, otherwise, property damage may
be caused.
◆
When removing the servo motor, we can not just pull the cable or hold the rotating shaft to pull the
motor, otherwise, the motor may drop and cause human injury or property damage.
◆
Do not directly strike the axis core, for example: tap or beat, this may cause the axis core and the
encoder attached to the opposite side of the axis damaged, otherwise, property damage may be
caused.
◆
Do not store the servo motor in the place that exceeds predetermined vibration, otherwise, property
damage may be caused.
To Next Page
Loading...
Need help?
General
