Chapter 7 EtherCAT Communication
The current position of the motor is where the home switch is valid. When the homing is started, the home switch
is at a high level, and reverse high-speed returns to home. After encountering the falling edge of the home switch,
it runs at a high-speed in the forward direction, after encountering the rising edge of the home switch, it will find
the rising edge of the Z signal at a forward low speed and stop.
0x6098 = 14
Reverse, home switch as deceleration point and Z signal as home
The current position of the motor is between the positive limit switch and the home switch. When the homing is
started, the home switch is at a low level, and reverse high-speed returns to home. After encountering the falling
edge of the home switch, it will find the rising edge of the Z signal at a low speed in the reverse direction and stop.
To Next Page
Loading...