SERVICE MANUAL NUMBER 22 STERNDRIVE (MCM) MODELS
90-860074--1 FEBRUARY 2002 Page 2A-9
CAUTION
When lowering engine into position Do NOT set engine on shift cable. Shift cable
outer casing can be crushed causing difficult or improper shifting.
8. Set engine on stringers.
9. Relieve hoist tension and disconnect sling from engine lifting eyes.
10. Install a separate sling between front lifting eyes to help equalize load on hoist during
alignment procedure.
75331
a
b
a-Sling In Starboard Lifting Eye
b-Sling In Port Lifting Eye
11. Attach a suitable hoist to the separate sling.
To Next Page
Loading...
Need help?
General