Micom P631 - Page 397

Parameter Address
Default Min Max Unit Logic Diagram
[spacer]
LOGIC: Time t2 output 23
030 091
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 24
030 095
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 25
030 099
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 26
031 003
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 27
031 007
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 28
031 011
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 29
031 015
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 30
031 019
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 31
031 023
0.00 0.00 600.00 s
[spacer]
LOGIC: Time t2 output 32
031 027
0.00 0.00 600.00 s
[spacer]
Settings for timer stage t2 for the respective outputs.
Note: This setting has no effect in the “minimum time” operating mode.
[spacer]
LOGIC: Sig.assig. outp. 1
044 000
061 000: MAIN: Without function Fig. 3-148, (p. 3-179)
[spacer]
LOGIC: Sig.assig. outp. 2
044 002
061 000: MAIN: Without function
[spacer]
LOGIC: Sig.assig. outp. 3
044 004
061 000: MAIN: Without function
[spacer]
LOGIC: Sig.assig. outp. 4
044 006
061 000: MAIN: Without function
[spacer]
LOGIC: Sig.assig. outp. 5
044 008
061 000: MAIN: Without function
[spacer]
LOGIC: Sig.assig. outp. 6
044 010
061 000: MAIN: Without function
[spacer]
LOGIC: Sig.assig. outp. 7
044 012
061 000: MAIN: Without function
[spacer]
LOGIC: Sig.assig. outp. 8
044 014
061 000: MAIN: Without function
7 Settings
P631
P631/EN M/R-11-C // P631-310-650 7-97