MICRO-EPSILON ILD 1420-10 - A 3.5.5.3 OUTVIDEO_RS422, Adjust Video Output; A 3.6 Example Command Sequence During Selection of Measurement Value

To Next Page

To Previous Page

Page 110

Appendix| ASCII Communication with Sensor

optoNCDT 1420

A 3.5.5.3 OUTVIDEO_RS422, Adjust Video Output

OUTVIDEO_RS422 NONE|VIDEO_RAW

Defines the data to be transmitted at a video image transmission via RS422.

- NONE: no video images

- VIDEO_RAW: output of uncorrected video signal (raw signal)

A 3.6 Example Command Sequence During Selection of Measurement Value

Command Content

MEASPEAK Peak selection for displacement measurement

MEASRATE

Measuring rate (under consideration of reflectivity and movement

of the target)

AVERAGE

Averaging of the measurement value (under consideration of reflectivity, structure

and movement of the target)

OUTPUT Selection of the output channel

OUTREDUCEDEVICE

Reduction of the output data rate (under consideration of the chosen output chan-

nel, its settings and the processing range of the target system)

OUTREDUCECOUNT

OUTHOLD Output characteristic during measurement errors

OUTADD_RS422 Selection of the additional values to be output for RS422 interface

BAUDRATE Baud rate settings RS422 interface