MICRO-EPSILON ILD 1420-10 - A 3.3.4 RESET, Boot Sensor; A 3.3.5 RESETCNT, Reset Counter; A 3.3.6 ECHO, Switching the Command Reply, ASCII Interface

Page 98
Appendix| ASCII Communication with Sensor
optoNCDT 1420
A 3.3.4 RESET, Boot Sensor
RESET
The sensor is rebooted.
A 3.3.5 RESETCNT, Reset Counter
RESETCNT [TIMESTAMP] [MEASCNT]
Sets back internal counters in the sensor.
- TIMESTAMP: sets back timestamp
- MEASCNT: sets back measurement counter
A 3.3.6 ECHO, Switching the Command Reply, ASCII Interface
ECHO ON|OFF
Setting the command reply with a ASCII command:
- ON: command reply on, for example <Kdo> ok (or notice of error)
->
- OFF: command reply off, for example ->