MICRO-EPSILON ILD 1420-10 - A 3.3 General Commands

Page 97
Appendix| ASCII Communication with Sensor
optoNCDT 1420
A 3.3 General Commands
A 3.3.1 HELP
HELP [<Command>]
Issues a help for every command. If no command is specified, a general help is output.
A 3.3.2 GETINFO, Sensor Information
GETINFO
Request of sensor information. Output see example below:
->GETINFO
Name: ILD1420-10
//Model name sensor, sensor series
Serial: 15030002
//Serial number
Option: 000
//Option number of sensor
Article: 4120212
//Article number of sensor
Cable head: Wire
Measuring range: 10.00mm
//Measuring range of sensor
Version: 001.010
//Version of software
Hardware-rev: 00
Boot-version: 001.000
->
A 3.3.3 LANGUAGE, Website
LANGUAGE DE | EN | CN
Determines the language for the web interface.
- DE: set language to German
- EN: set language to English
- CN: set language to Chinese
The chosen language setting applies to the website.