Page 19
Functional Principle, Technical Data
optoNCDT 1420
3.4 Technical Data ILD1420-CL1
Model ILD1420-10CL1 ILD1420-25CL1 ILD1420-50CL1
Measuring range 10 mm 25 mm 50 mm
Start of measuring range 20 mm 25 mm 35 mm
Midrange 25 mm 37.5 mm 60 mm
End of measuring range 30 mm 50 mm 85 mm
Linearity
1)
8 - 10 µm 20 - 25 µm 40 - 50 µm
≤0.08-0.1%FSO
Reproducibility
2)
0.5 µm 1 µm 2 µm
Measuring rate
3)
0.25 kHz / 0.5 kHz / 1 kHz / 2 kHz / 4 kHz
Light source Halbleiterlaser≤0.39mW,670nm(rot)
Permissible ambient light 10,000 lx
Spot diameter
± 10 %
SMR 90 x 120 µm 100 x 140 µm 90 x 120 µm
MMR 45 x 40 µm 120 x 130 µm 230 x 240 µm
EMR 140 x 160 µm 390 x 500 µm 630 x 820 µm
smallest ø 45 x 40 µm bei 24 mm 55 x 50 µm bei 31 mm 70 x 65 µm bei 42 mm
Protection class IP 65
Laser safety class Klasse 1 nach DIN EN 60825-1: 2015-07
Temperature stability ± 0.03 % FSO/°C
Operation temperature 0 ... +50 °C (non-condensing)
Storage temperature -20 ... +70 °C (non-condensing)
Output
analog
4...20 mA (1-5 V with cable PCF1420-3/U); 12 bit;
free scalable within the nominal range
4)
digital RS422 / 16 bit
Vibration 20 g / 20 ... 500 Hz (nach IEC 60068-2-6)
To Next Page
Loading...
Need help?
General