Page 89
Appendix| Optional Accessories
optoNCDT 1420
Appendix
A 1 Optional Accessories
IF2001/USB Converter RS422 to USB, type IF2001/USB,
useable for cable PCF1420-x/I or
PCF1420-x/U, inclusive driver,
connections: 1× female connector 10-pin
(cable clamp) type Würth 691361100010,
1x female connector 6-pin (cable clamp) type
Würth 691361100006
IF2004/USB 4 channel converter RS422 to USB useable for
cable PCF1420-x/IF2008 (IF2008-Y), inclusive
driver, connections: 2× Sub-D, 1× terminal
block
PS2020 Power supply for mounting on DIN rail, input
230 VAC, output 24 VDC/2.5 A
IF2008 The IF2008 interface card enables the syn-
chronous capture of 4 digital sensor signals
series optoNCDT 1420 or others or 2 enco-
ders. In combination with IF2008E a total of
6 digital signals, 2 encoder, 2 analog signals
and 8 I/O signals can be acquired synchro-
nously.
To Next Page
Loading...