Page 81
Set Sensor Parameter
optoNCDT 1420
7.6.5 Import, Export
A set of parameters covers current settings, setup(s) and the initial setup when booting the sensor. The menu Import & Export
enables easy exchange of sets of parameters with a PC/notebook.
Exchange set of parameters with PC/notebook, possibilities
Save set of parameters on PC Load set of parameters from PC
Menu Import & Export Menu Import & Export
Click on the button New set of pa-
rameters with the left mouse button..
The dialog Choose setups for export
opens.
You arrange a set of parameters by
selecting/deselecting the check boxes.
Click on the button Transmit file.
A Windows dialog for file transmission
opens.
Confirm the dialog with OK.
The operating system stores the set of pa-
rameters in the area Download.
File name for the following ex-
ample is <...\Downloads\
ILD1420_50BASICSETTINGS_Rubber
1.04... .JSON>
Click on the button Search.
A Windows dialog for file selection opens.
Choose the desired file and click on
the button Open.
The dialog Choose setups for ex-
port opens.
You define actions to be made by se-
lecting/deselecting the check boxes.
Click on the button Transmit
file.
A security query, see adjacent figure, helps to avoid that an existing setup is
inadvertently overwritten during import.
To Next Page
Loading...