Page 112
Appendix| ASCII Communication with Sensor
optoNCDT 1420
E332 Error during import Error during processing the import data
E333 No overwrite during import allowed No overwrite of measurement and device settings allowed
through import, set the checkbox.
E350 The new passwords are not identical Password and verification password do not match.
E360 Name already exists or not allowed The measurement setting name already exists or is not
allowed.
E361 Name begins or ends with spaces or is
empty
Name for the measurement setting begins or ends with
spaces or is empty.
E362 Storage region is full Number of storable measurement settings is reached.
E363 Setting name not found Name of the measurement setting to be loaded not found
E364 Setting is invalid Measurement resp. device setting is invalid
E600 ROI begin is greater than ROI end ROI begin is greater than ROI end.
E602 Master value is out of range Master value is out of valid range
E616 Software triggering is not active Software triggering is not active.
Warning Description
W320 The measuring output has been
adapted automatically.
The measuring output has been adapted automatically.
W570 The input has been adapted automati-
cally to a limited range.
---
To Next Page
Loading...