Page 119
Appendix| Control Menu
optoNCDT 1420
Import & Export Create file Measurement settings The measurement setting setups, the file with device
settings and the boot file can be combined in one
parameter set and exchanged with a PC or the like.
Boot setup
Device settings
Search Button starts file manager to select a parameter set.
Check file Overwrite existing setups (with the
same name)
Dialog prevents inadvertent overwriting of existing
settings.
Apply settings of the imported boot
setup
Transmit data
Access permission
Current access
permission
Value
Read only
Logout / Login Button starts change of access permission.
User level reboot
Professional / User
Sets the user level the sensor starts with after re-
boot. In this case MICRO-EPSILON recommends the
selection user.
Change password
Old password Value
Case-sensitive rules are observed for all passwords.
Numbers are allowed. Special characters are not al-
lowed. Maximum length is limited to 31 characters.
New password Value
Repeat new password Value
Change password
Button causes change of password.
To Next Page
Loading...
Need help?
General