Page 13
Laser Safety
optoNCDT 1420
Fig. 2 Laser warning labels on the sensor housing
During operation of the sensor the pertinent regulations acc. to IEC 60825-1 on „radiation safety of laser
equipment“ must be fully observed at all times. The sensor complies with all applicable laws for the manufac-
turer of laser devices.
Laser operation is indicated by LED, see Chap. 5.3.
LASER RADIATION
DO NOT STARE INTO THE BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1: 2015-07
P 1mW;
=670nm≤
THIS PRODUCT COMPLIES WITH FDA
REGULATIONS 21CFR 1040.10 AND 1040.11
Fig. 3 True reproduction of the sensor with its actual location of the warning labels, ILD 1420
i
If both warning labels are covered over when the unit is installed the user must ensure that supplemen-
tary labels are applied.
To Next Page
Loading...