Version 1.10 Pag. 189 di 203
Figure 127 - 5 Dot Drill report output
The parameter '% Compared average' is calculated as difference between the average of all 5 tests
and the average value of each single test.
E.g. for Up & Back: (8.328 – 8.565) / 8.328
The fatigability index is calculated using the average of the first 6 contact time values and
compared to the average value of the last 6 contact times.
𝐹𝑎𝑡𝑖𝑔𝑎𝑏𝑖𝑙𝑖𝑡𝑦 =
Avg_Last_6_Ct − Avg_First_6_Ct
Avg_First_6_Ct
To Next Page
Loading...
