© Microhard Systems Inc. 15
Once successfully logged in, the System Summary page will be displayed.
As seen above under Carrier Status, the SIM card is installed, but an APN has not been
specified. Setting the APN to auto (default) may provide quick network connectivity, but
may not work with some carriers, or with private APN’s. To set or change the APN, click
on the Carrier > Settings tab and enter the APN supplied by your carrier in the APN field.
Some carriers may also require a Username and Password.
Once the APN and any other required information is entered to connect to your carrier,
click on “Submit”. Return to the System > Summary tab.
2.0 Quick Start
Auto APN: Introduced in
firmware version v1.1.6-
r1142, the VIP4G will attempt
to detect the carrier based on
the SIM card installed and
cycle through a list of
commonly used APN’s to
provide quick network
connectivity.
To Next Page
Loading...
