Chapter 2 Printing
85
3
Set the print conditions.
• "Setting Print Conditions"(P. 85)
4
Tap [Print].
• Printing starts once the machine receives the job. Check printing progress in the print status area.
"Mimaki Printer Controller"(P. 96)
• Print speeds may differ for the same image data, depending on the width of the medium
loaded, print origin position, and resolution.
• Any errors will prevent further printing.
• The ink used in the machine is warmed before printing. Printing is disabled while the ink is
warmed.
Setting Print Conditions
No. Name Overview
1 Job Information Check the job information as needed.
2 Detailed Job
Information
Check the job details as needed.
3 Machine setting Check the machine settings information as needed.
4 Print origin Y Enter the print origin in the scan (horizontal) direction. "Print
Origin"(P. 86)
Print origin X Enter the print origin in the feed (vertical) direction). "Print Origin"(P. 86)
Print times Set the number of times to print. The specified number of times is displayed on
the queued jobs.
Pass Cannot be configured. The number of passes varies by resolution.
Over print Set the number of layers in overprinting.
Print direction Set to print unidirectionally or bidirectionally.
2
To Next Page
Loading...
