Mitsubishi Electric MELFA FR CR700 Series User Manual

11-138 11-138
11.6.11. Setting the background color of the program editor
It is possible to set the background color of the command area in the program editor.
For details on how to set the color, refer to “11.6.9 Character colors”.
Figure 11-24Setting the background color of the program editor.
11.6.12. Setting the syntax check at program save
You can set whether or not to have the syntax checked when you save a program and whether or not to display a
message when there are no syntax errors.
The default setting is automatic syntax checks with no message displayed if there is no syntax error.
Figure 11-25 Settings for Syntax Check Before Saving
Please note that it is easy to mistake off-line and online, etc., if the same color is used by the
background color.
Caution

Mitsubishi Electric MELFA FR CR700 Series Specifications

General

Manufacturer	Mitsubishi Electric
Category	Robotics
Payload Capacity	7 kg
Reach	908 mm
Degrees of Freedom	6
Repeatability	±0.02 mm
Weight	27 kg
Series	MELFA FR CR700
Robot Type	Collaborative
Installation	Floor, Wall, Ceiling