APP - 32
APPENDICES
3) Automatic refresh setting
a) CPU No.1
Setting No.
Automatic refresh
Points Start End
1
2
3
b) CPU No.2
Setting No.
Automatic refresh
Points Start End
1 20 M2000 M2319
2 40 M2400 M3039
3 640 D0 D639
4) System basic setting
Setting items Description
Operation cycle Default Setting
Operation at STOP to RUN M2000 is turned on by switching from STOP to RUN
Forced stop PX0
5) Latch range setting
Item Symbol
Latch (1) Latch (2)
Start End Start End
Internal relay M
Link relay B
Annunciator F
Data register D
Link register W
Latch (1) : It is possible to clear using remote operation (latch clear (1), latch clear
(1) (2)).
Latch (2) : It is possible to clear using remote operation (latch clear (1) (2)).
To Next Page
Loading...
