Mitsubishi Electric RD77MS2 - Page 552

550
12 DATA USED FOR POSITIONING CONTROL
12.9 Memory Configuration and Data Process
Parameter area (b)
Positioning data area
(No.1 to 600)
Servo parameter area
PLC CPU memo area
Monitor data area
Control data area
Buffer memory/Internal memory
Block start data area
(No.7000 to 7004)
Parameter area (a)
Parameter area (c)
Parameter area (a)
Servo amplifier
[Pr.1] to [Pr.7]
[Pr.11] to [Pr.24]
[Pr.43] to [Pr.57]
[Pr.81] to [Pr.83]
[Pr.89] to [Pr.95], [Pr.100]
CPU module
Engineering tool
(9) Data write(8) Data read
(9) Data write(8) Data read
Parameter area (b)
Flash ROM
Positioning data area
(No.1 to 600)
Servo parameter area
Block start data area
(No.7000 to 7004)
Parameter area (a)
Parameter area (c)
Internal memory
(nonvolatile)
Parameter area (b)
[Pr.8] to [Pr.10]
[Pr.25] to [Pr.42]
Parameter area (c)
[Pr.96], [Pr.97], [Pr.100]
[Pr.800] to [Pr.807]
[Pr.150] to [Pr.153]
[Pr.84]
[Pr.116] to [Pr.119]
[Pr.150], [Pr.151], [Pr.153]
[Pr.122], [Pr.123]
[Pr.116] to [Pr.119]
Simple Motion module