Mitsubishi Q Series User Manual

Appendix - 2 Appendix - 2
MELSEC-Q
A
PPENDI
X
Appendix 2 New Function of the Q62HLC
The following describes the new function of the Q62HLC.
Description
Item
Old model
Module of which the first five digits of
the production information is "10022"
or later or the first five digits of the
product information is "10011" or
later
Reference
section
Intelligent function module
switch setting (Switch 2)
Reserved (0 fixed)
Control status when switching to
program control can be selected.
1: Switch with executing control
Other than 1: Switch with suspending
control
Section 4.5
Manipulated value (MV value)
The manipulated value (MV)
becomes -50 for 25ms when
switching to program control.
(Suspends the PID control to switch
into program control.)
The control status when switching to
program control can be selected in
the intelligent function module switch
setting (Switch 2).
Section
3.2.16
App.

Mitsubishi Q Series Specifications

General

I/O Points	Up to 4096 points
Communication	Ethernet, RS-232, RS-485
I/O Modules	Digital, Analog, Specialized
Programming Language	Function Block Diagram, Structured Text
Power Supply	24V DC, 100-240V AC
Operating Temperature	0°C to 55°C
Shock Resistance	147 m/s2 acceleration, 3 times in each of X, Y, and Z directions
Program Capacity	Up to 252K steps