EasyManuals Logo

Mitutoyo DP-1VA LOGGER User Manual

Mitutoyo DP-1VA LOGGER
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
8
2 Basic Operations
No. 99MAM029A
Setting the batteries
1
Detach the battery box cover.
Pressing down the claw portion of the
battery box cover, pull out the cover
toward this side.
oyo Corporatio
n
IN JAPAN
Code No.
Model
Serial No.
Power
yoCorporatio
n
INJAPAN
Code No.
Model
Serial No.
Power
Must use the following types of battery
for battery operation.
Alkaline battery LR6
AA Ni-MH battery
Must use the following types of battery
for battery operation.
Alkaline battery LR6
AA Ni-MH battery
Battery box cover
Claw of battery box cover
2
Prepare the dry batteries and set them inside.
1
Prepare the batteries.
2
Insert the dry batteries in the battery box
following the battery polarity indication
inside the cover.
oyo Corporatio
n
ADE IN JAPAN
Code No.
Model
Serial No.
Power
NOTICE
Make sure that the coating of the battery terminals is not peeling or swelling before using. Any
peeling or swelling of the coating on the battery terminals may cause a malfunction such as poor
contact or short circuiting.
If the product is not used for a long period of time, remove the batteries. If the batteries are left
inside, battery liquid leakage may make the product unusable.
Tips
AA alkaline batteries (LR6) or nickel-metal-hydride (Ni-MH Size AA) can be used. Do not use
manganese batteries. When alkaline batteries are used, the print may become faint due to the
characteristics of the batteries.
Do not set different types of batteries together.
Be sure to correctly set the polarity of batteries.
3
Press the battery box cover back.
Tips
Press it back into place until it clicks.
When using alkaline batteries or Ni-MH batteries, the printing speed may be slower compared to
when the AC adapter is used.
Batteries can be used as a power supply when the temperature is 10 °C or higher. In case the
temperature is lower than 10 °C, a defect such as a faint printing may occur.
The product does not have a charging function. Use a store-bought charger for charging.
The battery life of the product is about 10,000 lines (in case printing in "LARGE" characters/5
seconds using 1,600 mAh Ni-MH batteries). The battery life may largely vary depending on the use
method or environment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitutoyo DP-1VA LOGGER and is the answer not in the manual?

Mitutoyo DP-1VA LOGGER Specifications

General IconGeneral
BrandMitutoyo
ModelDP-1VA LOGGER
CategoryPrinter
LanguageEnglish