Mitutoyo DP-1VA LOGGER User Manual

63
5 Function Settings
No. 99MAM029A
5.2
Various Parameter Settings and Setting
Items
Parameter setting is the function to set and customize the operation of the product. They
shall be set according to the purpose of use.
As explained in
"5.1 Various SYSTEM/WORK MODE and Print Contents/Output to
PC" on page 61, enter the "PARAMETER SETUP MODE" by pressing
POWER
while
holding down
DATA
with the power turned off, then just release
POWER
, and when the printing
starts, if
DATA
is released, the mode will be "PARAMETER SETUP MODE".
POWER
TOL.
REC/STOP
PRINTER
CLEAR
STAT.
OUT LOG
CANCEL
DATA
FEED
Setting change
Setting determination and moving
to the next parameter.
In the parameter setup mode, the parameters are xed when all parameters are set
changing them with the operation of
DATA
and
STAT.
OUT LOG
. The changed contents are not
saved if the power is turned off during operation.
Tips
• TThe key operations differ in parameter setting for DATE and TIME.
For further details on the key operation for setting the date and time, refer to "2.1.4 Date and
Time Setting" on page 12.
• For further details on the operation to return the parameters to the initial setting, refer to
"3.6.4 Return to the Initial Settings" on page 48.

Parameters list
♦: Initial setting values
Setting
order
Setting items Setting/print contents
1 PARAMETER CLEAR PARAMETER CLEAR: Clear the parameter,
PARAMETER NO CLEAR: Not clear the parameter ♦
2
SYSTEM MODE
DP-1: DP-1 mode ♦, MP: MP mode
3
WORK MODE
MODE0, MODE1 ♦, MODE2, MODE3
4 BAUD RATE (RS-232C
communication speed)
1,200, 2,400, 4,800 ♦, 9,600, 19,200
5
PARITY (RS-232C com-
munication parity check
method)
NON: no setting, EVEN: even number ♦, ODD: odd num-
ber
6 DATA LENGTH (data
length of RS-232C com-
munication)
7 ♦, 8
7 PRINT SIZE
( print character font size)
NORMAL ♦, LARGE
(only NORMAL in case MODE2 is selected)

Mitutoyo DP-1VA LOGGER Specifications

General

Brand	Mitutoyo
Model	DP-1VA LOGGER
Category	Printer
Language	English