Mitutoyo DP-1VA LOGGER - Other Options

80
7Specications
No. 99MAM029A
7.4.2 Other Options
Part No. Product name Note
09EAA084 RS-232C conversion cable
To output the measurement data to the RS-
232C port.
Cable length 1 m, D-sub 9 pins
965516 GO/±NG judgment cable
To output the tolerance judgment result.
Cable length 2 m, 10 pins terminal - loose wires
937179T Foot switch
This switch enables the measurement data
input with foot operation.
09EAA094 RS-232C counter cable
Use to connect with a KA Counter.
Cable length 1 m, D-sub 9 pins
06AET993
Code Out Unit (for KA-200
Counter)
This unit enables RS-232C output from a KA
Counter.
06AFM386
Measurement Data Collection
Software USB-ITPAK (corre-
sponding to V2.1 and higher)
This software enables the measurement data of
the measuring instrument with Digimatic output
connected to the product to be fetched into a
Microsoft Excel sheet prepared by the custom-
er by sending it to a PC via a USB cable.
As the cursor movement can be automatized
by registering the fetching process to Microsoft
Excel, this displays its full power in the opera-
tional efciency improvement of inspection op-
eration for the mass-produced products which
have a lot of repetitive works.
06AFZ050 USB cable (A-microB)
This USB cable is used to output measurement
data to the PC.
Commercially available products can be used.
Cable length 1 m, USB Type A-to-Micro-USB Type B