Mitutoyo DP-1VA LOGGER - 3 Advanced Operations and Useful Functions; 3.1 Printing only Measurement Data and Tolerance Judgment Results

27
3 Advanced Operations and Useful Functions
No. 99MAM029A
3
Advanced Operations and
Useful Functions
Advanced operations and useful functions are explained.
3.1
Printing only Measurement Data and Toler-
ance Judgment Results (MODE0)
The printing contents can be limited to the measurement data and tolerance judgment
result by setting WORK MODE to "MODE0" in the parameter setup mode.
The operation to measure in "MODE0" and print its result is explained here.
1
Set the WORK MODE to "MODE0".
1
While pressing
DATA
press
POWER
,
then just release
POWER
, when the print-
ing starts, then release
DATA
.
» The power is turned on and enters the
parameter setup mode.
2
Press
DATA
twice.
» The WORK MODE currently set is print-
ed (MODE1, here).
3
Press
STAT.
OUT LOG
repeatedly until "3 WORK
MODE :MODE0" is printed.
4
Press
DATA
.
» "MODE0" is determined.
2
3
5
Press
DATA
repeatedly until the param-
eter settings list is printed.
» Parameter setup mode is completed.
POWER
TOL.
REC/STOP
PRINTER
CLEAR
STAT.
OUT LOG
CANCEL
DATA
FEED