Mitutoyo DP-1VA LOGGER User Manual

28
3 Advanced Operations and Useful Functions
No. 99MAM029A
2
Input the measurement data.
Measure the workpiece, press
DATA
.
» The measurement data is printed each
time
DATA
is pressed.
Measurement
data
Tips
• The maximum number of data that can be handled with MODE0 is 100,000.
• Regardless of the SYSTEM MODE (DP-1, MP), only the measurement data and tolerance judg-
ment result can be printed maximum 100,000 lines when the WORK MODE is set to "MODE0".
- When printing the statistical calculation result or histogram:
MODE1
- When printing D chart:
MODE2 (when DP-1 mode is set)
- When printing calculation result for X¯-R control chart:
MODE3 (when DP-1 mode is set)
• The limit data shall be set before entering the measurement data to print the tolerance judgment
result.
For further details on the limit data setting method, refer to
"2.3.1 Tolerance Settings" on
page 19.
POWER
TOL.
REC/STOP
PRINTER
CLEAR
STAT.
OUT LOG
CANCEL
DATA
FEED

Mitutoyo DP-1VA LOGGER Specifications

General

Brand	Mitutoyo
Model	DP-1VA LOGGER
Category	Printer
Language	English