No. 99MBC122A
ii
Safety Precautions
Read these Safety Precautions thoroughly before operating the system to use it properly.
These safety precautions include such information as to prevent an injury to the operator and other
persons or damage to property. Be sure to observe the precautions.
Do not remove the cover or disassemble the product. Otherwise you may be subject to electric shock,
and there is a risk of breakage or re due to a short circuit caused by metallic powders that have
gotten inside the product.
Precautions for Use
Product applications and handling
z
This product is a measuring instrument.
Do not use it for any purposes other than measuring.
z
This is an industrial product.
Do not use this product for any purposes other than industrial applications.
z
This product is precision equipment.
y Handle this product with care. Do not apply excessive shock or force to any of the parts during
operation.
y Be sure to mount the gage head securely.
y When handling the gage head, hold it by a part near the stem.Do not hold by the spindle/rubber
cap or cable.
Installation environment
This product is designed for indoor use. To ensure optimal performance for this precision equipment,
take the following conditions into account when installing this product.
y Vibration
Install this product in an environment where it will be subject to minimal vibration. Using this prod-
uct in a place with signicant vibration for an extended period of time may result in malfunction of
the precision components. If using this product in a place with signicant vibration is unavoidable,
lay a vibration-proof rubber sheet, etc., under this product in order to reduce the vibration.
y Dust
Dust in the installation site negatively aects the electrical components in the Display. Install this
product in an environment where it will be subject to minimal dust.
y Sunlight
If this product is exposed to direct sunlight, the heat will cause deformations in the main body, neg-
atively aecting its operation. If installing this product in an environment that is exposed to direct
sunlight, such as near a window, is unavoidable, protect it from the sunlight by curtaining it o, etc.
y Ambient temperature, humidity
Avoid using it in a place that is subject to sudden changes in temperature or humidity.
To Next Page
Loading...
Need help?
General
