Motorola MC9500-K - Page 40

2 - 6 MC9500-K Series Mobile Computer Integrator Guide
Figure 2-4 Mounting Hole Dimensions
3. Install top two screws into the wall.
The screw heads should protrude 12.7 mm (0.5”) from the wall.
Figure 2-5 Install top Two Screws
4. Align the mounting bracket’s top two mounting holes with the screws. Place mounting bracket on screws.
Figure 2-6 Install Bracket on Screws
5. Tighten the two screws to the wall securing the bracket.
6. Install and secure two screws at the bottom of the bracket.
68 mm
2.7 in.
379 mm
14.9 in.
12.7 mm
0.5”
12.7 mm
0.5”