A - 2 Symbol LS3408 Product Reference Guide
Convert Wedge Data Do Not Convert Wedge Data
5-9
Function Key Mapping Disable
5-10
FN1 Substitution Disable
5-10
Send Make and Break Send Make and Break Scan Codes
5-10
RS-232 Host Parameters
RS-232 Host Types
Standard RS-232
1
6-6
Baud Rate 9600
6-7
Parity None
6-8
Check Receive Errors Enable
6-9
Stop Bit Select 1 Stop Bit
6-10
Data Bits 8-Bit
6-10
Hardware Handshaking None
6-11
Software Handshaking None
6-13
Host Serial Response Time-out Minimum: 2 Sec
6-15
RTS Line State Host: Low RTS
6-16
Beep on <BEL> Disable
6-16
Intercharacter Delay Minimum: 0 msec
6-17
Nixdorf Mode A/B and OPOS/JPOS Beep/LED
Options
Normal Operation
6-18
Ignore Unknown Characters Send Bar Code
6-18
USB Host Parameters
USB Device Type HID Keyboard Emulation
7-4
USB Country Keyboard Types (Country Codes) North American
7-5
USB Keystroke Delay No Delay (0 msec)
7-7
USB CAPS Lock Override Disable
7-8
USB Ignore Unknown Characters Enable
7-8
Emulate Keypad Disable
7-9
USB Keyboard FN1 Substitution Disable
7-9
Table A-1
Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.