ioThinx 4510 Series Software Tools
IR Information: The IR status window will pop-up after you click one of the IR blocks. The name is used
for representing this internal register (max. length = 16, “.” character is not allowed).
Protocol
This section introduces the protocol settings functions.
Modbus TCP Slave
The Modbus TCP Slave section shows the definition of the device’s Modbus registers. It allows you to
define your own data point type or address of the Modbus registers. The point type and address of a register
can be default, existing configuration, or user-defined.
Load Default: Click this button to load default settings of all Modbus registers.
To Next Page
Loading...
